CA Health & Safety Code Section 25214.15

(a)

A package or packaging component qualifies for an exemption pursuant to Section 25214.14 only if the manufacturer or supplier prepares, retains, and biennially updates documentation containing all of the following information for that package or packaging component:

(1)

A statement that the documentation applies to an exemption from the requirements of Section 25214.13.

(2)

The name, position, and contact information for the person who is the manufacturer’s or supplier’s contact person on all matters concerning the exemption.

(3)

An identification of the exemption and a reference to the applicable subdivision in Section 25214.14 setting forth the conditions for the exemption.

(4)

A description of the type of package or packaging component to which the exemption applies.

(5)

Identification of the type and concentration of the regulated metal or metals present in the package or packaging component, and a description of the testing methods used to determine the concentration.

(6)

An explanation of the reason for the exemption.

(7)

Supporting documentation that fully and clearly demonstrates that the package or packaging component is eligible for the exemption.

(8)

The documentation listed in subdivisions (b), (c), (d), (e), (f), (g), or (h), whichever is applicable for the exemption.

(b)

In addition to the requirements specified in subdivision (a), if an exemption is being claimed under subdivision (a) of Section 25214.14, the manufacturer or supplier shall prepare, retain, and biennially update documentation containing all of the following information for the package or packaging component to which the exemption applies:

(1)

Date of manufacture.

(2)

Estimated time needed to exhaust current inventory.

(3)

Alternative package or packaging component that meets the requirements of Section 25214.13.

(c)

In addition to the requirements specified in subdivision (a), if an exemption is being claimed under subdivision (b) of Section 25214.14, the manufacturer or supplier shall prepare, retain, and biennially update documentation that contains all of the following information for each regulated metal intentionally introduced in the package or packaging component to which the exemption applies:

(1)

Identification of the specific federal or state law requiring the addition of the regulated metal to the package or packaging component.

(2)

Detailed information that fully and clearly demonstrates that the addition of the regulated metal to the package or packaging component is necessary to comply with the law identified pursuant to paragraph (1).

(3)

A description of past, current, and planned future efforts to seek or develop alternatives to eliminate the use of the regulated metal in the package or packaging component.

(4)

A description of all alternative measures that have been considered, and, for each alternative, an explanation as to why the alternative is not satisfactory for purposes of achieving compliance with the law identified pursuant to paragraph (1).

(d)

In addition to the requirements specified in subdivision (a), if an exemption is being claimed under subdivision (c) of Section 25214.14, the manufacturer or supplier shall prepare, retain, and biennially update documentation containing all of the following information for the package or packaging component to which the exemption applies:

(1)

The type and percentage of recycled material or materials added to the package or packaging component.

(2)

The type and concentration of each regulated metal contained in each recycled material added to the package or packaging component.

(3)

Efforts to minimize or eliminate the regulated metals in the package or packaging component.

(4)

A description of past, current, and planned future efforts to seek or develop alternatives to minimize or eliminate the use of the regulated metal in the package or packaging component.

(e)

In addition to the requirements specified in subdivision (a), if an exemption is being claimed under subdivision (d) of Section 25214.14, the manufacturer or supplier shall prepare, retain, and biennially update documentation containing all of the following information for each regulated metal intentionally introduced into the package or packaging component to which the exemption applies:

(1)

Detailed information and evidence that fully and clearly demonstrates how the regulated metal contributes to, and is essential to, the protection, safe handling, or functioning of the package’s contents.

(2)

A description of past, current, and planned future efforts to seek or develop alternatives to minimize or eliminate the use of the regulated metal in the package or packaging component.

(3)

A description of all alternative measures that have been considered, and, for each alternative, an explanation as to the technical constraints that preclude substitution of the alternative for the use of the regulated metal.

(4)

Documentation that the regulated metal is not being used for the purposes of marketing.

(f)

In addition to the requirements specified in subdivision (a), if an exemption is being claimed under subdivision (e) of Section 25214.14, the manufacturer or supplier shall prepare, retain, and biennially update documentation containing all of the following information for the package or packaging component to which the exemption applies:

(1)

The percentage of reused materials.

(2)

Identification of the federal or state health or safety law regulating the product being conveyed by the package, the package, or the packaging component.

(3)

Identification of the federal or state transportation law regulating the transportation of the packaged product.

(4)

Information demonstrating that the package is disposed of in accordance with the requirements of this chapter or Chapter 8 (commencing with Section 114960) of Part 9 of Division 104.

(5)

A description of past, current, and planned future efforts to seek or develop alternatives to minimize or eliminate the use of the regulated metal in the package or packaging component.

(g)

In addition to the requirements specified in subdivision (a), if an exemption is being claimed under subdivision (f) of Section 25214.14, the manufacturer or supplier shall prepare, retain, and biennially update documentation containing all of the following information for the package or packaging component to which the exemption applies:

(1)

The percentage of reused materials.

(2)

Information and evidence that demonstrates that the environmental benefit of the controlled distribution and reuse of the package or packaging component is significantly greater, as compared to the same package or packaging component manufactured in compliance with the applicable maximum concentration level set forth in subdivision (c) of Section 25214.13.

(3)

A means of identifying, in a permanent and visible manner, any reusable package or packaging component containing a regulated metal for which the exemption is sought.

(4)

A method of regulatory and financial accountability, so that a specified percentage of the reusable packages or packaging components that are manufactured and distributed to other persons are not discarded by those persons after use, but are returned to the manufacturer or identified designees.

(5)

A system of inventory and record maintenance to account for reusable packages or packaging components placed in, and removed from, service.

(6)

A means of transforming returned packages or packaging components that are no longer reusable into recycled materials for manufacturing, or a means of collecting and managing returned packages or packaging components as waste in accordance with applicable federal and state law.

(7)

A description of past, current, and planned future efforts to seek or develop alternatives to minimize or eliminate the use of the regulated metal in the package or packaging component.

(h)

In addition to the requirements specified in subdivision (a), if an exemption is being claimed under subdivision (g) of Section 25214.14, the manufacturer or supplier shall prepare, retain, and biennially update the following documentation for the package or packaging component to which the exemption applies:

(1)

Applicable test data.

(2)

A description of past, current, and planned future efforts to seek or develop alternatives to minimize or eliminate the use of the regulated metal in the package or packaging component.

(i)

A manufacturer or supplier shall submit the documentation required pursuant to subdivisions (a) to (h), inclusive, to the department, as follows:

(1)

Upon receipt of a written request from the department, the manufacturer or supplier shall, on or before 30 calendar days after the date of receipt, do one of the following:

(A)

Submit the required documentation to the department.

(B)

Submit a letter to the department indicating the date by which the documentation shall be submitted, which may be no more than 90 calendar days after the date of receipt of the department’s request.

(2)

If the department finds that the documentation supplied pursuant to paragraph (1) is incomplete or incorrect, the department shall notify the manufacturer or supplier that the documentation is incomplete or incorrect, and the manufacturer or supplier shall submit complete and correct documentation to the department within 60 calendar days after the date of receipt of the notification.

(j)

If a manufacturer or supplier fails to comply with subdivision (i) by any of the specified dates in that subdivision, the manufacturer or supplier shall, with respect to the package or packaging component to which the documentation request applies, comply with one of the following:

(1)

Immediately cease to offer the package or packaging component for sale or for promotional purposes in this state.

(2)

Replace the package or packaging component with a package or packaging component that conforms with the regulated metals limitations specified in Section 25214.13, in accordance with a schedule approved in writing by the department.

(3)

Submit complete and correct documentation for the package or packaging component, in accordance with a schedule approved in writing by the department.